Open Air Cinema Inflatable Screen Movie Screen Inflatable For
|Product Name||Inflatable movie screen, inflatable cinema screen|
|Material||210D Reinforced Oxford|
|Technical||Double stitching,with fourfold stitiching at bottom stress point,in
order to make sure the inflatables strong enough|
With CE/UL certificate blower, repair kits
|Packing||Durable export standard carton|
|Produce Time||7-15 days after order confirmed|
|Printing||Logo, Advertising Banner can be added on the product|
|Supply Voltage||AC 110V / 220V|
|Working Temperature||-20~60 Degrees|
Inflatable Movie Screen Installation:
1) Remove contents from packaging and lay out deflated Inflatable
Movie Screen in a clear, flat area free of low overhangs, such as
trees, eaves or anything else that could puncture or damage your
2) Ensure that your Inflatable Frame is lying so that the side with
Velcro is facing up.
3) Attach Movie Screen to frame, locate the four legs on the bottom
of the frame and unfold them completely.
4) While item is still lying flat, plug power cord into receptacle
or other outlet device to inflate your Inflatable Movie Screen.
This process may take a few minutes. Make sure the air intake is
clear of fabric or other obstruction and zipper is fully closed.
5) Attach 2 nylon tethers to the upper “X”-shaped nylon strap on
each side of the Inflatable Movie Screen.
6) Stand the Inflatable Movie Screen upright, ensuring that fans
are located on the bottom. Locate the 4 small Base Stakes and screw
them into the ground through the provided holes in each leg of the
stands. And locate the 4 base stakes and screw them into the ground
through the blower.
7) Insert the 4 tether stakes into ground and attach nylon tethers
to tether stakes.
8) Once the blower is unplugged and stops blowing, the Inflatable
Movie Screen will deflate.
Frequently Asked Questions (FAQ’s):
Q: What are the ideal conditions to use the Inflatable Movie
A: The Inflatable Movie Screen is the designed for nighttime
viewing. The brightness of your image will vary with the type of
projector you use. We recommend you set up your Movie Screen in as
dark of an area as possible (away from street lights and porch
lights), and refer to your projector’s instruction manual for ideal
Q: What happens if my Inflatable Movie Screen becomes torn?
A: Rips in the Inflatable Movie Screen can be sewn by hand (no
special thread is required) or taped with clear packing tape. Note:
if the screen itself becomes torn, it is recommended that it be
sewn or taped on the backside to reduce visible damages and refl
ection from projectors.
Q: How can I clean my Inflatable Movie Screen?
A: Wipe clean with a damp cloth and allow to dry before storing
away. Use mild detergent if necessary.
Q: When I unplug my Inflatable Movie Screen, it defl ates. Why is
A: Your Inflatable Movie Screen will not stay inflated unless it is
plugged in and the fan is blowing air.
Q: How much electricity does an Inflatable Movie Screen consume?
A: It uses about as much energy as a few standard strings of
Q: What is the best way to store my Movie Screen?
A: Store in the included storage bag and keep in a cool, dry
Q: There are wrinkles in my Movie Screen. What should I do?
A: After a period of flatness, the fold will disappear.
Q: The screen is wrinkled will this affect the quality of the
A: Some wrinkling may occur as a result of folding your screen.
However, the wrinkles will NOT affect the image on the screen as
they are not noticeable in darker environments. Make sure the
screen is firmly attached to the frame as this will allow for a
more even surface for the projection.
About Our Company: